DELIGHT Wind Solar Hybrid Charger Controller

The wind solar controller is an automatic control device used in a wind solar power generation system to control multiple solar cell arrays to charge the storage battery and the storage battery supplies the solar inverter load. The solar controller uses a high-speed CPU microprocessor and a high-precision A/D analog-to-digital converter, which is a computer data acquisition and monitoring control system. It can quickly and instantly collect the current working status of the PV system, obtain the working information of the PV station at any time, and can also accumulate historical data of the PV station in detail, providing accurate assessment of the rationality of the PV system design and the reliability of the quality of the inspection system components. The full basis. In addition, the solar controller also has a serial communication data transmission function, which allows centralized control and remote control of multiple photovoltaic system substations.

reverse connection protection. two-way load over-current, short-circuit alarm protection.two-way load multiple control mode: light control, time control, full open function. battery overcharge and over discharge alarm protection function: two-way load different voltage lower limit protection function fan input, photovoltaic input lightning protection function Scientific and perfect off-line protection. When the wind turbine is running at high speed, the battery end is open. Controller protection to avoid controller damage battery temperature compensation function, effectively extend the battery life system abnormal alarm protection function RS485 communication function, working status and power generation data can be uploaded in real time (extensible GPRS wireless, TCP/IP wired communication) light control to turn on the light: the sky automatically turns on the light, the daylight automatically turns off the light. (After dawn, the lights will be turned off even if the timing is not reached.) switch light wisdom judgment function: such as lightning, short-time shadowing, etc. can be automatically filtered

Our Difference

SATISFACTORY SERVICE
- 15 working days delivery
- 5 years warranty
- on-site installation instruction

ADVANCED LIGHTING TECHNOLOGY
- Design for lighting applications
- Dimming and operating profiles for adaptive lighting
- Superior LED luminaires

CUSTOM SOLUTION FOR YOUR APPLICATION
- Precision- engineered for your application
- Array for solar engines available for your application
- Aesthetic- design and value-built engine options

Production Description

MPPT Wind solar hybrid street-lighting controller is the firstly apply MPPT technology for the small power wind generator in china. With the application of this technology, the charge efficiency has vastly improved under the situation of low-wind, and obvious exceed the traditional PWM charging mode of 30%. Presently, we have solved such so technical problem on charging efficiency of the low-power wind generator already. Especially apply to the horizontal and vertical low-power wind generator of 100W to 600W. This type controller has strong compatibility and a great various protection functions, have more 10 years of application practice to improve performance continuously to make it has high reliable and stability. It can be used to the street lighting, monitoring system, outdoor advertisement, home type generation system etc

Performance characteristics:
1.) Digital design, the module non-contact structure, stable and reliable performance.
2.) MPPT technology, breeze start, to solve the low wind speed fan dormant state.
3.) Wind turbine low-voltage charging, charging sampling points can be set. (PWM controller requires the fan voltage to be higher than the battery to charge)
4.) 12V / 24V automatic identification, versatility.
5.) 200W-600W series of general, compatible with all types of systems.
6.) LCD display running data, abnormal information display.
7.) Dual output, with light control, time control, 24 hours of output and other output.
8.) User programmable. Including the output mode, voltage point, boost point, light control point, time and other parameters

Protective function:
1.) Wind turbine speed limit protection
2.) Component open circuit protection
3.) Anti-reverse protection
4.) Battery overvoltage / over discharge protection
5.) Battery power down protection
6.) Battery loss protection
7.) Overload protection
8.) Short circuit protection
9.) Anti-reverse protection

Application:
1- Stand-alone wind/solar hybrid power station.
2- Standalone domestic household wind/solar hybrid power system.
3- Mobile Communication base stations, expressway and other non-residential regions.
4- Coastal islands, remote mountainous, border posts for regions shortage of or without electricity.
5- Government demonstration projects, landscape lighting project, street light project etc.

System Capability
Model	1KW/24V,48V	2KW/48V,96V	3KW/48V,96V	5KW/96V,120V,240V
Wind-turbine power[KW]	1	2	3	5
Rated wind-turbine voltage[V]	28.8 / 57.6 / 115.2 / 144 / 288
PV Module power[W]	300	600	1000	1500
Rated battery voltage[V]	24 / 48 / 96 / 120 / 240
Electrical parameters
Consumption at standby [mA]	≤60
Consumption at night [mA]	≤20
Operating Temperature Range	-25℃ ~ +60℃
Cooling Method	Convection with double cooling fans
Operating temperature	0%~98% Non-condensing
Altitude [m]	≤2000
Terminal	Barrier terminal
LCD Display	LCD (16X2characters, green backlight)
Display Language	English
Data-transfer port	RS232
Noise[dBA]	<30
Machinery information
Ingress Protection Class	IP20 (indoor)
Mounting	Wall mounting type
Main dimension(W*D*H)[mm]	380*355*150
Main-device net weight [kg]	8.5
Dump dimension(W*D*H)[mm]	440*160*170	440*240*150	440*240*150	550*420*170
Dump-load net weight [kg]	4	7	7	14

Package: Export standard carton with foam inside for tough handling and long-distance ocean transport

Production process

Payment & Delivery

Payment terms	T/T	EXW	30% In advance, 70% before delivery
		FOB
		CFR/C&F	30% In advance, 70% against copy of B/L
		CIF
	L/C	Total amount above USD50,000, we accept L/C at sight
	West Union	Total amount less than USD5,000
	PayPal
Delivery time	15-20 working days after receiving down payment for one container

FAQ:
Q1. Can I have a sample order for wind solar hybrid charge controller
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than one container

Q3. Do you have any MOQ limit for Off-grid wind solar charge controller order?
A: Low MOQ, 1pc for sample checking is available


Q4. How do you ship the goods and how long does it take to arrive?
A: Airline and sea shipping also optional. Shipping time depends on distance.

Q5. How to proceed an order for wind and solar hybrid charge controller?
A: Firstly let us know your requirements or application.
Secondly We provide solution according to local sun weather conditions.
Thirdly customer confirms the samples and formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on wind solar hybrid charge controller product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.